Decorative Pear Ornament 15 cm Home & Office Decor

Decorative Pear Ornament 15 cm | 3D Print STL Model | Home & Office Decor

This decorative pear ornament is a standard-sized design, approximately 15 cm (about 6 inches) in height. Its dimensions allow it to be easily displayed on tables, shelves, and display cases, making it an eye-catching object in any décor. It features a fluid form and a hollow, open design detail in the center, offering an aesthetic and balanced appearance.
It is optimized for 3D printers and prepared for seamless printing on desktop/home 3D printers. It is suitable for both personal use and commercial printing projects.

Model Features

Approximate height: 15 cm
Single-piece, robust structure
Clean geometry suitable for 3D printing
Compatible with PLA, PETG, ABS filaments
Printable with minimal or no supports

Recommended Print Settings

Layer Height: 0.2 mm
Infill: 10% – 15%
Wall Thickness (Perimeters): 1.2 – 1.6 mm
Print Orientation: Flat base sitting on the print bed
Supports: Not required / optional

Usage Areas

Home and office decoration
Table, shelf, and display case ornament
3D prints for gifting purposes
Decorative collection items

Commercial Use License
 

This 3D model can be used for personal and commercial printing.
Permitted Uses:
You may 3D print the model and sell it as a physical product.
You may print it for use as a gift or for decorative purposes.
Prohibited Uses:
Reselling the STL file or its derivatives.
Sharing the STL file, whether for free or for a fee.
Redistributing the file on other platforms.
Designer credit is not mandatory but is welcomed.