GRINCH - NO AMS - Free 3D Print Model

Search models, users, collections, and posts

3Dwave75

Household>Festivities

IP Report

Print Profile(2)

All

P1S

H2S

H2C

H2D Pro

X1 Carbon

X1E

H2D

P2S

P1P

X2D

A2L

A1 mini

0.14mm layer, 2 walls, 8% infill

Designer

20.2 h

5 plates

4.8(28)

0.14mm layer, 2 walls, 8% infill A1 Mini Profile

22.7 h

6 plates

5.0(1)

Open in Bambu Studio

Boost

1132

2820

1.6 k

295

Released

Description

Content has been automatically translated.

Show original

The most famous and grumpy Grinch, transformed into the season's funniest Christmas ornament.

This unique 3D design features him with his mouth open, ready to be filled with candies, chocolates, or any sweets you want to use for decoration. It's ideal for hanging on the tree or as a small festive treat bowl.

Add a touch of humor and sass to your Christmas! Easy to print on your Bambu printer.

Download it, print it, and share your candy-filled creation!.

Comment & Rating (73)

@Denatus

Print Profile

0.14mm layer, 2 walls, 8% infill

This was a very difficult print. Had multiple failures with support that failed in different ways. The candy bowl is very small and fit almost nothing at all, see attached picture. Model looks pretty cool in PLA Silk+ but was not worth the trouble!

Support Issue:Default tree in the mouth area was too weak, had to change too strong tree to succeed. Very hard to remove the support from the fur part.

Bed Adhesion Issue:The brim for the small part of the hat failed to adhere to the clean pie textured build plate. Tweaked the settings a bit to get it to work.

The profile uploader has replied

@3Dwave75

Many thanks, I will keep it in mind for future models

Show original

@fedosovaleria

Print Profile

0.14mm layer, 2 walls, 8% infill

The candy dish turned out to be very small almost nothing fits in it The supports are simply terrible they break during printing are difficult to remove and leave chips There are some strange stripes in places and holes in the eyes The mouth opening is unstable It is unclear how the pompom attaches to the cap or I thought the necessary part was a support and removed the excess

The profile uploader has replied

Show original

@3Dwave75

Thank you very much I will keep it in mind for future models

Show original

@user_3547876559

WOW!!! that is a lot of complaining for a model you didn’t have to pay for. maybe you should design your own model!

(Edited)

@airshark

Boosted

Already left a review in the comments, but wanted to say thanks again for this! Super cute design and a fun print! Need to feed it some candy now.

The designer has replied

@3Dwave75

muchas gracias!

@pinoginolino

Because of this project, my printer experienced the blob of death and my printer broke If you care about your printer, absolutely do not perform this print

The designer has replied

Show original

@user_2654038586

What is your printer model?

@3Dwave75

Is it because of my file? Perhaps it's your misuse, the file has been printed more than once and on different machines. So please before blaming something or someone, make sure. Regards

Show original

@Whitecaps

It printed without any inconvenience. No issues at all — a perfect print. Maybe next time you should check your first layers before letting it print for hours; that step is crucial. The main base is very large and has a big contact surface, so having problems like the one you mentioned is quite unusual. Always keep the bed surface clean and carefully check the first layers when doing a large print. Also, although it’s not my problem, comments like yours about a tested print, especially towards someone who freely shares their work, are not very nice.

@BlazeTrail

SUNLU High Speed PETG Filament Green, for the main part of the body and the rest is Bambu Lab colors i think it turned out wonderful , the middle support in his mouth messed up 1/3 the way trough a 12hr print so i just let it run and the red covers up the imperfections. Awesome model no ams makes it not waste a lot of Filament .

(Edited)

The designer has replied

@3Dwave75

Spectacular thank you for sharing

Show original

@airshark

Boosted

Thank you so much for this super cute model! It was a fun project to print and put together and looks great, the family loves it! Challenges I had: *Tiny open pinhole at the back of the red "throat." Nobody can tell it's there. It may have happened when removing supports. *Gluing on the puff ball on the hat is hard. No real positive fit. *Eyes missing the tiny white "flare" dot shown in the model preview. I printed the eye parts with a .2 nozzle and added two tiny white flecks/discs for the eyes. *The models said they needed repair in Bambu Studio. It was able to repair the models with no problem. Overall like I said it is a great print and the assembly being a challenge in spots was fun for me. For anyone who cares, I used PLA Bambu Grass Green Matte, Bambu Sparkle Green, Bambu Basic White, Bambu Matte charcoal black, Hatchbox Performance PLA Red Boost on the way!

(Edited)

The designer has replied

@3Dwave75

Thank you very much for your bots and for your constructive criticism I will note them down for the next projects I'm going to upload they are always welcome ☺️

Show original

@DaTh

Print Profile

0.14mm layer, 2 walls, 8% infill

Great print, all parts fit perfectly

Show original

@Drikarav

Print Profile

0.14mm layer, 2 walls, 8% infill

Printed without problems

(Edited)

Show original

@NorinRead

Print Profile

0.14mm layer, 2 walls, 8% infill

great print, turned out very well. scaled it to 133%

Show original

@3DJeka

Print Profile

0.14mm layer, 2 walls, 8% infill

great model! thank you very much and good luck! printed on p2s with ams2pro, PLA Bambulab.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

GIF

AMS Riser V2

maCyo42

45.8 k

12.2 k

The Christmas Grinch / NO AMS

model lover

10.7 k

3.9 k

Stitch / NO AMS

Ethanprint3D

36.6 k

16 k

Max – Grinch ’s Companion (NO AMS)

MBOSS3D

3.7 k

1.9 k