Barrett Wallace Hueforge
Print Profile(1)
Description
If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out:
https://www.patreon.com/c/sub_13/membership
Find the frame for my Hueforges here:
https://makerworld.com/en/models/2113362-200-x-200-hueforge-frame#profileId-2286621
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Green
At layer #12 (1.04mm) swap to Brown
At layer #14 (1.2mm) swap to Jade White for the rest.
Thank you all for your Reviews/Comments/Support,
It is all very much appreciated :-)
Boost Me (for free)
Thank you all for your kind boosts, they are all very appreciated!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)