iPod Video Bluetooth adapter

If you want to use your iPod Video with a Ugreen Bluetooth Transmitter and you don't want to hold the dongle separately, this is the print you need.

As simple as you can see, it's just a little pouch where you can slide your iPod in, slide the BT TX in, connect it via the headphone jack, and you are good to go and listen to some music without having a cable.

The model is symmetric, so you can put the BT TX on the left or on the right flipping the model. I created the model with the BT on the right, but I couldn't find a shorter cable, so I put it on the left. If you are right handed like me, I think it much more confortable to hold like this.

This model fits perfectly an iPod Video 5th gen 60GB, so with a thick case. It you have a thin case iPod, you may have to print a little spacer and put it inside in order to have a snugg fit.
To insert the BT TX, you have to insert the jack side first, then slide it all the way out in order to have the space to put in the opposite side.

Print it in TPU, so you have a bit of flex, in order to put everything inside easely, and much more grip on the parts than with PLA or PETG. You also don't risk scratching it.

Let me know if you like it, if you print one yourself (maybe upload a photo, I'll really appreciate it!), and also consider checking the other stuff I make on my profile. I'm still learning how to model things, but I have lots of ideas and I'll upload them soon!

If you also want to make a tip to me, I will really appreciate it, and
I'll think about continue making this stuffs 'cause I will know that
someone likes my design!