EGO Broom Wheel Frame
Print Profile(1)
Description
This is a frame for adding wheels to your EGO broom. Mine is the EGO Multi-head, it has a 25mm shaft.
It has a ½" axle hole for ½" smooth rod, available at most hardware stores. I used 2) 7" plastic wheels, any type of wheel with a ½" hole should be fine. I held them on with 2) ½" collars (also readily available at a hardware store). If you are taller, (I'm 5' 8") you may benefit from a larger wheel to raise the handle a bit more. You will also need some bolts or screws, I used 4) 6Mx45 screws. I tapped the lower hole, but I'm not sure if that was necessary.
I've used it once and it seems like it will be strong enough. I printed it with PLA 4 walls and 25% gyroid infill.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)