user_898866629

cover

IMG_5590.jpeg

IMG_5568.jpeg

PNG image.png

plate_1.png

IMG_5592.jpeg

2025-12-12_8d1f747d7e2e3.jpeg

Dont adjust the Z axis, if re-sizing the X and Y &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x300mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm     #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6     #00358e PLA BambuLab Basic Blue  Transmission Distance: 4     #bb3d43 PLA BambuLab Matte Dark Red  Transmission Distance: 1.5     #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5     #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8     #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5  This print uses 6 unique filaments Swap Instructions:     Start with Charcoal     At layer #12 (1.04mm) swap to Blue     At layer #16 (1.36mm) swap to Dark Red     At layer #20 (1.68mm) swap to Ash Gray     At layer #24 (2mm) swap to Beige     At layer #33 (2.72mm) swap to Ivory White for the rest.

0.08mm layer, 2 walls, 100% infill

Post Apocalyptic couple selfie! Took a pic at burning man and converted it via Hue Forge

Couple Selfie Burning Man

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models