Wall Hook for TSO GRS-16 PE v2 Square

There are other hooks for the TSO GRS-16 PE track saw squares but they seemed clunky/harder to use. This includes a curve so its easy to slide the square's edge on until it snaps into place. This is also designed to have only two screws for easy stud mounting. It fits #6, #7 and #8 screws in the countersunk holes. #9 might work but would likely interfere with the square and its fit.

Printed on its side just fine, it likely prints on its back fine as well. PLA worked well - probably works with PETG as well.