Quad Lock Wall Mount - Free 3D Print Model

Search models, users, collections, and posts

Marcel Hölzl

Household>Other House Models

IP Report

Print Profile(1)

All

X1 Carbon

P1P

P1S

A1 mini

X1E

H2D Pro

H2D

H2S

H2C

P2S

X2D

A2L

0.2mm layer, 2 walls, 30% infill

Designer

25 min

1 plate

4.5(4)

Open in Bambu Studio

Boost

152

225

Released

Description

Content has been automatically translated.

Show original

I have created a wall mount for the Quadlock system

You will need an M5 nut to attach the Quadlock part to the mount

Hope someone else besides me can use it Have fun with it

Comment & Rating (6)

@robert.paul.mat

Great print! It allowed me to match the wholes from the print of a cfmoto 450mt gps support so that i can i have quadlock adapter fit onto it. I also explored integrating your part into that print, so that i can skip the 4 screws, but i don't know what would be the best orientation for it to be printed. Thank you for the share!

@Sweatyhogg

Print Profile

0.2mm layer, 2 walls, 30% infill

Printed from ASA. Perfect.

@fredus59

Print Profile

0.2mm layer, 2 walls, 30% infill

How to fix this to the wall once the charger is mounted on the bracket, knowing that it covers the screw holes, or how to fix the charger once the bracket is fixed to the wall, the nut no longer being accessible? otherwise good job

The profile uploader has replied

Show original

@Marcel_Hoelzl

When inserting the nut into the 3D print, you can mount the 3D print to the wall first and then screw on the charger, as the 3D print will hold the nut for you

Show original