H2 hepa attachment | Tenergy Sorbi DH02 filter
Print Profile(1)
Description
This is a H2 hepa filter attachment that I made for my H2D. It uses the Tenergy Sorbi DH02 filter. The filter base is attached to the printer using m3x8 screws. I printed this attachment in PETG using the .20mm standard BBL settings with supports on. The specific filters I installed can be purchased on amazon, the link is provided below.
Install is simple, four m3 screws hold the base in place using the holes for the laser smoke ventilation pipe attachment. Then insert the filter into the filter case and slide onto the base. There is good air flow with the fan on and the base leaves enough room not to interfere with the fan operation.
Filter link:
https://a.co/d/1jkjQHn
Boost Me (for free)
If you like this model, feel free to leave a boost. Happy printing :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)