midnight special hobby paint shaker for jigsaw

Inspired by the setup Martin Kovac https://www.youtube.com/@NightShiftScaleModels  showed years ago in his studio tour video.  The rubber straps I used are https://www.amazon.com/dp/B0BB97J3WM (non affiliate) but you could use a hose clamp, zip ties, rubber bands, string or try your luck with just the clamp. This works with some no name 4" bar clamps and Bessey 4 ½" micro bar clamps. The hole for the blade is parametric so you can adjust to super glue a jigsaw blade in place or make it tight and heat the blade prior to insertion if you want.  The bar clamps have a fastener on the fixed jaw to enable reversing the clamp direction, remove that and slide the bar through the print then re-attach the fixed jaw and the bar clamp will be removable yet captive. Should hold a decent variety of paint bottles and keep the cap from opening during shaking