Galvo Laser Camera Mount
Print Profile(1)
Description
This camera mount is designed for galvo laser heads that use two underside mounting screws spaced 125 mm apart.
Since the original screws on most galvo heads are too short, you’ll need slightly longer M4 screws to secure the bracket.
The camera holder can be tilted 180 degrees (up and down) to help you find the perfect viewing angle and center point on the laser bed.
Prints cleanly without supports, preferably in PETG with 4–6 walls to ensure strong screw joints.
Required Hardware
Camera Tilt Mechanism
• 1 × M4 nut
• 1 × M4 screw, 35 mm
• 1 × M4 washer
Mounting the Bracket to the Galvo Head
• 2 × M4 screws, 25–30 mm
Notes
• Designed for galvo heads with 125 mm screw spacing
• Support-free print
• PETG recommended for durability
Boost Me (for free)
Thanks for printing my designs. If you enjoy the model, a boost or follow helps support more practical workshop and crawler designs.
More tools and modules are added regularly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)