Unifi USW-Lite-16-PoE Wall mount Ubiquiti

✨ [ Model Overview ]   

This model is a wall mount bracket for the USW-Lite-16-PoE from Ubiquity in the Unifi. The mount allows you to quicky pop-in or out the switch from the wall mount.  The mount was design for a light snug for a top surface use or side mounting (like my photos). I may not be snug enough for an upside-down application, you may add a velcro if you need to secure the switch.

📐 [ Dimensions ]

205mm x 198 mm x 41mm (tall)

Screw holes are: ⌀ 6mm (hole diameter)

📇 [ Printing ] No support required / no post processing. Print and use.  PETG-HF in white worked fine for my application but PLA should also be fine depending on your application but PLA will be stiffer and I didn’t test it in PLA for fit tolerances. 

⚖️ [ Licence and terms of use ]

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.