Gridfinity ikea 365+ lid holder, kitchen organizer

Gridfinity 5x4 (standard size 42mm) container/holder/kitchen organizer for 10 ikea 365+ plastic lids. 

Slot is long enough to fit biggest 365+ rectangular plastic lid so it easily holds other (round and square) lids as well. I don't have bambu lid so dunno if it fits as it looks thicker than plastic ones. Slot is 17mm wide. On the bottom I left only couple magnet holes as I don't think object that big needs more than corner and side magnets. Personally I don't put magnets as it sit firm on the baseplate and don't fall.

I printed it using ‘draft’ profiles, 2 or 3 perimeters (for stronger handles that separates the lids) and with one bottom layers for faster print time (it should work without any if your bed adhesion is good). 
 

I also attached second print profile that has height modifier which add another wall lop for stronger handles that separates the lids

• Layer height: Draft 0.24 but Extra Draft 0.28 should be good too. 
• Wall lops: 2 - 3  
• Bottom shell layer: 1 should be enough (you could try with 0 for faster print time if your bed adhesion is good)
• Infill: 15-20% should be enough