Quick-draw hip quiver, ambidextrous
Print Profile(1)
Description
Boost Me (for free)
If you like it, you can support me. Please leave a message if you need other arrow diameters
Quick-draw waist quiver, each holds 6 arrows, supports ambidextrous use, for a total capacity of 12 arrows
The arrow clip is 7.2 in diameter, suitable for arrows with an outer diameter around 7.2. It is recommended to print the clip with TPU95A; PETG/PLA will cause wear on the arrows, and drawing arrows will not be as smooth as with TPU
This design requires hardware. Below is the configuration for a single 6-arrow quiver: 16 M3 nuts, 12 M3*8 screws, 4 M3*10 screws (optional, required if using a quick-release belt clip to attach directly to the belt; not required if the belt is threaded directly through the plate). The nuts are embedded; pause printing has been added to the print profile, simply resume printing after inserting the nuts
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)