Rushfpv Range 4X Flat Antenna Frame

I've seen the Rushfpv Range 4X flat antenna used, but I couldn't find a model, so I had to make one myself

Both the upper and lower parts have ¼-inch openings, making it easy to mount on a tripod

Only 2 screw holes are reserved, supporting M2 and M2.5; just add a nut. Threading is prone to problems if too small, so a nut was used directly

Tested with M2.5*25 screws, it fits perfectly

PTEG, only 1 perimeter was used (to save material; strength is irrelevant for fragile items)

Probably doesn't support TPU, it's too thin and won't hold. Use TPU with caution