Hawkeye (Clint Barton) – AMS
Print Profile(3)
Description
Description
Total Height: approx. 25cm (after assembly)
This print profile is optimized for a Clint Barton/Hawkeye FanArt (multicolor with Bambu AMS)
Clean color layers, organic supports, good mix of time & quality
Simply bring the individual parts together after printing and secure with adhesive
I have already placed 2 arrows on the print plate in the print file - if desired, you can easily duplicate them via copy & paste
Recommended Settings (0.4 mm) (already pre-configured in the 3MF file)
- Layer height: 0.20 mm
- Perimeters: 2, Top/Bottom 5/5
- Infill: Gyroid 10%
- Seam: rear · Thin walls On
- Supports: Tree, Organic, Angle 30°
- I set the head with 3 perimeters and Top/Bottom 6/6 to get a nice fine texture
Legal: FanArt, private / non-commercial use only. All rights reserved by Marvel
Boost Me (for free)
You are welcome to support me with free Boosts! :-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)