Standard MATX Motherboard Liquid-cooled Chassis

People have always asked me to make an MATX chassis. I spent some time modifying my customized PS4 Pro chassis again, and now it can fit a standard MATX motherboard. The power supply still uses a CSPS Huawei server power supply, and the power board is still from a 'high-end IT' brand. The liquid cooling still uses a 180 fish-nest integrated liquid cooler, and a 13.3-inch LED display, and a half-height 10 Gigabit network card

Dimensions are 34.5*29*13.6, not too big, not too small, after all, it's an MATX motherboard, and it just fits an integrated liquid cooler. The cooling should be better than traditional top-down air coolers. It's mainly compact, easy to use, and quiet. My workstations all use 180 liquid coolers. Theoretically, it can accommodate a graphics card around 27cm. Those interested can download it and have fun. I randomly chose the colors to use up leftover filament

It also uses a large number of knurled nuts M3*5*5 and a large number of M3 screws of various sizes! The graphics card extension cable used is 15cm 90-degree. Using MATX is mainly for expandability, so it can also have half-height expansion, and also uses an X8 riser cable. There's a baffle, but it's not shown in the photos

The acrylic for the LED panel is 3mm thick. There are pictures, just find a Taobao shop to cut a piece for under 30 yuan! If using an LED, it acts as a protective layer. If not using an LED, you can simply cut a board and design your own style!