Mickey Mouse AMS2 PRO & upper glass Handle X1C P1S

I propose this fantastic handle for the AMS 2 PRO and for the top glass door of the Bambu Lab X1, X1C, X1E and P1S in the shape of a Mickey Mouse glove

The print does not require supports except for the screw holes (I had to add them necessarily), however, they are removed with extreme ease (for this purpose, use a cutter, scalpels or a pointed object)

I used Bambu Lab PLA Basic in white and black (colors can be changed in the slicer). The print is very simple and only consumes 10.29 grams of filament in total

To disassemble the original handles, use the two hex keys provided by Bambu Lab with the printer: the small one for the AMS 2 PRO, the large one for the top glass

When disassembling the AMS 2 PRO handle, be careful not to lose the transparent elastic sealing rings as they will be reused together with the screws. In fact, the original screws and sealing ring are used, no need to purchase anything. Do not overtighten the screws, stop when they are snug

These handles give a fantastic touch of personalization to the printer, I'm literally thrilled with them!

For those interested, I also designed a hand for the front door handle of the printer, also in the shape of a Mickey Mouse glove (here is the link: Mickey Mouse Handle for X1 X1C X1E P1S Door by Andrew Sims MakerWorld: Download Free 3D Models)

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Infill 15%

• Grid pattern

• Supports enabled (only for screw holes)

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration speed 8000 mm/s

Outer wall acceleration speed 8000 mm/s