iFlight Nazgul ECO Bei Zheng 251gps GPS Mount Bracket
Print Profile(1)
Description
Adapter for iFlight Nazgul ECO's Beizheng 251GPS dog seat fixed bracket, tested with PLA Matte, PETG Basic, and TPU for AMS materials
no supports required, the model was designed with optimization for TPU material, so printing with TPU is recommended (If you need to use other materials like PLA or PETG, simply switch to your desired material in the print initiation interface, the print model has already accounted for material sinkage rate)
Installation Process
1, After printing, you will get two printed parts: the casing and the shim plate
2, Remove the dog seat, keeping the four screws
3, Ensure the 251 is connected to the flight controller interface, then invert the casing and GPS, and insert the GPS vertically into the casing (a little bit of sticking is normal, just ensure it's inserted vertically), when the GPS's PCB plane is slightly below the casing's wire groove, and a clear limit is felt, it means installation is complete
4, Place the shim plate on the GPS shielding cover (note that the large rounded side should fit snugly against the casing), if the shim plate and casing are flush at this point, it confirms the GPS is installed correctly
5, Align the GPS correctly, and then tighten the bolts in sequence according to the diagonal rule
6, Completed
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)