Slinky-Christmas Tree (No AMS Required)
Print Profile(2)
![[AMS Optimized, 1 Plate]](https://makerworld.bblmw.com/makerworld/model/US2c59c1a008d62b/517575916/instance/2025-12-13_62c4698d4061a8.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
🎄Slinky Christmas Tree · No AMS Required
For the best printing results, PLA filament is recommended.To make the star decorations on the stumps and treetops more secure, a small amount of glue can be used to enhance adhesion.
If you print with PETG, or if the parts do not fit properly after printing, try adjusting “X-Y Outer Contour Compensation”
If too tight, adjust it to -0.05 mm.
If too loose, adjust it to 0.05 mm.
⚠️ Important Handling Instructions
After printing, the spring structure will be fused together.
Use a thin blade to gently open a small section of the gap, then carefully pull and separate the spring layers to activate the bouncing spring mechanism.
Handle sharp tools with care.
Please refer to the video below for a detailed demonstration.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (164)