DUAL LID BEYBLADE DECK CASE(Freedom Gundam Themed)

DUAL LID BEYBLADE DECK CASE (GUNDAM-THEMED VERSION)

----------------------------------------------------------------------------------

IMPORTANT — READ BEFORE PRINTING & ASSEMBLY

This guide contains all necessary details for preparing, printing, and assembling the Dual Lid Beyblade Deck Case. Follow each instruction carefully to ensure proper fit and durability.

Instructions:

For this model you will be needing the following hardware:

• 4x 5x3mm magnets
• 8x m2x4mm countersunk screws (recommended type of screw)

Hinge Information

• Hinges are replaceable and designed to snap-fit into the main body.
• When tightening the screws, do not overtighten—doing so may cause the lid sides to crack.
• Recommended materials for printing the hinges:
  • PETG, ABS, or ASA (for strength)
  • PLA is acceptable, as hinges can be easily reprinted and replaced in the future.
• The lids include friction-fit screw holes designed specifically for the hinge screws.

Lid Printing Information

• Supports are recommended under the top design, preferably snug-type supports.
• The recommended Top Z-Distance for supports is 0.1–0.15 mm, depending on printer accuracy. This minimizes sagging under the top decorative layer.
• Example configuration:
  • Lids printed using Elegoo Centauri Carbon PETG
  • Top Z-distance: 0.14 mm

Decoration Information

• All decorative pieces include pre-sized slots in the main model.
• Use a small amount of super glue to attach the decorations.
• All clearances are pre-adjusted so the parts slot in cleanly without excessive force.

Tolerances & Printing Notes

• Tolerances may vary depending on the printer and slicer settings.
• The design already includes adjusted clearances, but fine-tuning may still be needed.
• For printers like the Bambu Lab P1S, an XY Compensation of −0.08 mm to −0.09 mm works well for accurate fitting.

WANT TO CREATE YOUR OWN DESIGN? Check out this link for the open-source version and customize your own deck case: https://makerworld.com/en/models/2094580-dual-lid-beyblade-case-plain-open-source-version#profileId-2264563