Raised a sheep little sheep Shaun the Sheep

My Pet Sheep Little Lamb Toy

Model Introduction

• Simple assembly with color separation, head printed with Bambu Lab AMS, articulated joints for various poses
• For those without Bambu Lab AMS, you can choose the 'Print by Part' profile with 'Pause for Color Change' version, only two color changes are needed. Please note that when changing colors, even if the filament has already been extruded, click 'Not yet extruded' a few more times to flush the filament clean and avoid color mixing
• There are two print profiles, one is 'Print by Part' and the other is 'Print by Plate Sequentially', you can choose as needed. Tested with no supports required, and can be printed directly
• The colors are simple, mainly black and white. For the additional packaging box, I used translucent filament. You can also download and match colors according to your preferences

Installation Notes

• The head installation might be a bit tight; rotating it left and right while pressing it in will make it easier
• Note that when installing the lamb's legs for the first time, insert them perpendicularly to the lamb's body with a slight twist and a bit of force. Then, when retracting the lamb's legs inwards, also keep them as perpendicular as possible and with the toe seam facing upwards, this will be easier

• 

Strength Issues

• Regarding the issue of the limb buckles breaking easily, the structure has been optimized. The default profile tested with Bambu Lab official PLA filament has acceptable strength, but using other types of filament may result in breakage
• I have uploaded a profile with 'Flat Printed Limbs', which has greater strength. However, there might be flaws on the support surface. This can be used if the buckle structure tends to break easily

Additional Content

• A new keychain version has been added to the profiles, so you can use the little lamb as an ornament

• 

Recommended Models

• Little Bee Raffle Machine - Free 3D Printed Model - MakerWorld
• Fortune-Bringing Tumbler Horse - Free 3D Printed Model - MakerWorld
• Heidashuai Color-separated Assembly, No Bambu Lab AMS Required - Free 3D Printed Model - MakerWorld
• Please like, boost, and support me. I will continue to create more fun models, thank you