Indoor Biking, Zwift Racing Table

I designed my own table for indoor trainings sessions on the bike. It's designed in a size to fit phone, laptop, tablets, bottles and all the other stuff in might need or want to have in reach. 

I used the Creality Ender-3 V3 Plus with 300mm x 300mm plate. So you need a big printer and still the table is set together with 4 bigger and smaller accessory parts.

The table is really stable and takes my 14" MacBook, iPad, phone and bottles with ease. I put some holes around the table if I might wanna add anything there later, like bottle holder, cable management whatever.... Some of these things I already planned but haven't printed or tried myself. Maybe someone comes up with good ideas. One hole for the screw is always combined with second hole for a small 6mm pin to get rid of any movement for attached parts. I attached one bottle holder and prototypes for a magsafe phone holder. Dimensions for the magsafe charger are the Baseus one.

For the top parts I made one with honeycomb structure and one flat.

I printed the table in PLA and works fine. The holes for the legs are tight but it's better to sand them down to get a snuck fit. For the feet I would use TPU.

What you need, besides big printer and quite a bit of filament:

• 10x M6x20mm countersunk screws 
• 10x M6 nuts
• 4x 25mm wooden sticks as legs
• few more M6 screws and nuts if you want to add accessory