Snowbrick

Snow Brick Maker – Complete Winter Building Set

Turn fresh snow into building blocks.
This winter playset lets you quickly create neat, repeatable snow bricks for forts, walls, towers or any wild idea your kids come up with.

The set includes a reinforced rectangular mold on stable legs, a snow scoop, a compacting hammer and a smoothing plate. The mold has a textured outer surface for a secure grip in gloves and extra rigidity, so the bricks come out dense, with sharp edges and consistent size. All parts are designed for everyday use in cold weather and print cleanly on most FDM printers.
The set really shines when printed at its native scale on printers of the H2S, H2D and H2C series.

How to use

1. Place the mold on the snow with the open side up.
2. Fill it loosely with snow using the scoop.
3. Compact the snow with the hammer, adding a bit more if needed.
4. Level the surface with the smoothing plate.
5. Lift the mold by the legs and carefully slide out the finished brick.

Repeat the process and you will quickly get a stack of identical snow bricks, ready for building a fort, an igloo wall or a whole winter city. Kid-friendly, sturdy and very satisfying to use for both children and adults.
 

Included parts:

• Snow brick mold with elevated stand
• Snow scoop with drainage holes
• Compacting hammer
• Smoothing/pressing plate
• Hex-shaped tamping accessories

Recommended print settings:

• Material: PLA or PETG
• Layer height: 0.2 mm
• Infill: 35–50%
• Supports: Not required for most parts
• Do not touch the profile print settings!!!

This model is perfect for winter activities, family play, and outdoor builds. Strong, simple, functional — a fun toolset to turn fresh snow into creative construction!

If you would like to sell physical prints of my 3D models, you can purchase a commercial license through Boosty