HSW Honey Comb Stoage Wall Infinity Kippbox V2
Print Profile(1)
Description
Hello everyone,
I have been working intensely on this box for the past few days, producing numerous prototypes.
My goal was to design it to be as practical as possible, making it easily customizable later on.
The box is compatible with the Honeycomb Storage System.
The V1 housing is compatible with the V2 box, provided you can remove the box.
For customization:
It is advisable to separate the two objects after downloading the STL or 3MF file to arrange them better. In my prints, I achieved the best results by placing the housing vertically on the print plate, meaning with the 8 corners facing downwards.
To adjust the box size, you need to scroll all the way down and modify the "laeng_gesamt" parameter.
I printed the housing in PLA and the inner box in PETG, as it contains a spring mechanism. This can also be adjusted if needed.
If there are other systems you need it for, or if you have ideas or suggestions for improvement, I would greatly appreciate your feedback.
Boost Me (for free)
Many optimizations require a lot of filament, so I would greatly appreciate a boost.
Enjoy the model
Lukas
Boost Me (for free)
Many optimizations require a lot of filament, so I would greatly appreciate a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)