Polar express - Hueforge 2 colours

All aboard the polar express! 2 colour hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.52mm

Filaments Used:
    #000000 PLA Sun lu Matte Black  Transmission Distance: 0.1
    #ffffff PLA sun lu white  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Sunlu Matte Black
    At layer #10 (0.88mm) swap to sunlu white for the rest.