Dual-Shelly S-120 Power Hub
Print Profile(1)
Bill of Materials
- 5x2 mm round neodium magnets x 8:
- S-120 PSU x 1:
- Shelly 1 Gen 3 x 2: Make sure you are getting the ones for junction boxes, not the mini square ones, no matter the voltage/type
Description
Custom enclosure for an S-120 24V power supply plus 2× Shelly 1 Gen3. Includes alignment rails for easy lid placement, tight 5×2 mm magnet sockets, and a slightly loose lid tolerance for smooth handling.
Recommend printing it in PETG or higher heat resistance. If the load is small enough PLA could work, but do so at your own risk.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)