608 bearing 6082rs 608zz 608-2z

The Essential 608 Bearing Savior (SKS.3D.WS)

See Mark 2 below

https://makerworld.com/en/models/2571878-608-bearing-updated-easier-to-print#profileId-2835316

Meet the 608 Bearing Savior from SKS.3D.WS  – a clever, single-print solution designed to be your emergency replacement or low-friction spacer! This print-in-place bushing exactly matches the dimensions of the ubiquitous 608 bearing (8x22x7mm), proving that sometimes, the simplest prints are the most essential.

This design features a perfectly sized bore and outer diameter, printing as a frictionless sleeve that’s ready to use right off the build plate.

🧩 Print Details & Recommendations

• Print-in-place design (No assembly needed, just drop it in!)
• Dimensional Accuracy: Designed for a perfect fit, but highly dependent on your printer's calibration.
• Standard PLA works great 
• Recommended 0.10 mm layer height for best surface quality.

Boost Me (for free)

Boost Me (for free): If you enjoy my functional models and want to help me create more ingenious solutions, please consider leaving a Boost 🚀 — your support keeps the Workshop running! 🤗

 

⚠️ Important Functional Disclaimer

This is a 3D printed plastic bushing, not a rolling element bearing. It is NOT suitable for high-speed, high-stress, or heavy-duty applications (like skateboards or heavy machinery). It excels as a temporary fix, spacer, or for light-duty, manual-turn applications.