Lightbox Borussia Mönchengladbach
Print Profile(2)
Description
A beautiful lightbox with the Borussia Mönchengladbach logo.
You need to print the front panel and one(!) of the three boxes.
The front panel is available in three colors (black, white, and green) or just black/white.
Matching coasters from Borussia Mönchengladbach
Inside, an LED strip is glued to the side in several runs. So not on the back, but on
the side wall. Then the light distribution is better too.
The front panel holds quite well with a snap-fit mechanism, gluing is not necessary.
However, the panel should be well aligned before pressing it together
I usually use a neutral white COB LED strip with
a USB connection and a switch in the cable
Clean the print bed thoroughly beforehand; otherwise, any residue or dark residue adhering to
the plate will also be visible in the print. I also recommend calibrating your filament beforehand
Please leave a like, follow, comment with photos, and a rating for the print profile
Other football fan articles are available here
My other models here
Boost Me (for free)
If you like the model, please boost, follow, like, and comment!
This way I can create more models.
Thank you very much!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)