YoRadio case for 4" ILI9488 TFT LCD 480*320 - V1
Print Profile(1)
Description
Case for YoRadio based on ESP32 with ILI9488 TFT LCD 480×320 display
Front panel:
- Knob diameter: 50 mm
- Plexiglass: 3 mm, size 130 × 75 mm
- Front panel includes a mounting spot for the Infrared Receiver Module 1838 (38 kHz, Iduino ST1089)
Internal mounting area:
- Main board: ESP32-S3 GPIO Expansion Board
- Mounting holes: Ø 3 mm
- Hole spacing: 76.2 × 76.2 mm (3000 × 3000 mil)
Rear panel:
- Openings prepared for RCA connectors
- Opening for a 2-pin figure-eight (C7/C8) power socket
Assembly notes:
The case is designed for very easy assembly.
The back panel is printed together with the side walls.
The top and bottom covers are attached with M3 screws.
Both the display and the encoder should be screwed directly to the front panel.
The plexiglass is best mounted using 0.2 mm double-sided tape.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (13)