Elf on the Shelf Legs Elf Pants Walking Running
Print Profile(1)
Description
Elf on the Shelf Walking or Running Legs
My other designs in the same vein
Elf Walking in Rain Boots: https://makerworld.com/en/models/2086975-elf-on-the-shelf-legs-elf-pants-walking-boots#profileId-2255639
Elf walking in Elf Shoes: https://makerworld.com/en/models/2087114-elf-on-the-shelf-legs-elf-pants-walking-running#profileId-2255796
Deficating Else Pose: https://makerworld.com/en/models/2084754-elf-on-the-shelf-legs-or-pants-pooping-seated#profileId-2253112
Stand Elf Pants, 2 options:https://makerworld.com/en/models/2076333-elf-on-the-shelf-legs-or-pants-two-versions#profileId-2243139
https://makerworld.com/en/models/2076333-elf-on-the-shelf-legs-or-pants-two-versions#profileId-2243139
🌟 Description
Bring back the classic holiday magic! These $3D$ printable legs and iconic curly-toed elf boots are the perfect replacement for your scout elf's floppy cloth body. Designed to be printed in festive colors, this model allows your elf to stand, walk, and pose in classic holiday style.
This design features:
- Integrated Tights/Pants: Printed in a single piece, designed to look like a snug pair of red tights.
- Iconic Boots: Sculpted with the traditional curled toe and fuzzy white trim for an unmistakable elf look.
- Superior Posing: Allows your elf to stand upright and maintain dynamic poses far better than the original soft body.
If you love the classic, whimsical aesthetic, this is the essential $3D$ printed upgrade for your holiday helper!
⚙️ Multi-Color Print Settings (Recommended)
This design is ideal for Multi-Color printing (e.g., using a Bambu Lab AMS or Prusa MMU) to achieve the red, green, and white look.
| Part/Color Zone | Recommended Filament Color | Notes |
|---|---|---|
| Legs/Tights | Red PLA | Standard festive red. |
| Boots | Green PLA | Classic bright elf green. |
| Boot Trim | White PLA | Use a matte white for a "furry" look. |
Single-Color Printing (Alternative)
If you are printing in a single color, use Red and plan to paint the boots green and the trim white after printing for the best results.
| Setting | Recommended Value | Notes |
|---|---|---|
| Printer | FDM | |
| Material | PLA (for best color/painting) | |
| Layer Height | $0.15mm$ - $0.2mm$ | $0.15mm$ for better detail on the boot trim. |
| Infill | $15\%$ | Standard |
| Supports | Required | Needed under the waist/hip attachment area and inside the curve of the elf boots. Use tree supports for easier removal. |
| Brim/Skirt | Skirt (2-3 lines) |
🛠️ Assembly & Installation
- Prep the Elf: Carefully cut the stitches on the elf's red suit just below the waist (where the arms start) and remove the soft lower body/legs.
- Insert Legs: Place the new $3D$ printed hip joint into the bottom opening of the elf's red fabric suit.
- Secure: Use a few small dots of hot glue or super glue inside the suit to secure the $3D$ printed part firmly to the fabric.
- Pose & Enjoy: The boots provide a stable base for standing and dynamic posing.
📸 Showcase Your Print!
Upload your makes and share how you use these festive legs!
- #ClassicElf
- #ElfOnTheShelfUpgrade
- #$3D$PrintedChristmasBoots
- #MultiColorPrint
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)