Shelly1 + AddOn Wall Mount Wall Mount

I designed this mount because I want to control and monitor my two garage doors using a Shelly 1 and an add-on for each door through Home Assistant. To keep everything neat and organized, I bought a small control cabinet where I can install all components properly.
The mounting hole spacing is 60 mm and suitable for 4 mm countersunk screws. Two small clips hold the Shelly securely in place, and there is enough clearance beneath the add-on to prevent heat buildup. Cables can be routed cleanly underneath the mount.
The mount is designed so that it can be printed without any support structures. Enjoy!

I designed this mount because I want to control and monitor my two garage doors, each with a Shelly 1 and an Add-On, via Home Assistant. For this, I bought a small control cabinet where I want to install everything neatly.
The drilling distance is 60 mm and is suitable for 4 mm countersunk screws. Two small clips hold the Shelly securely in position, and there is sufficient clearance under the Add-On to prevent heat buildup. Cables can be routed neatly under the holder.
The holder is designed so that it can be printed without support structures. Have fun with it!