Fender Extension Adapter "Fender Flute"
Print Profile(1)
Description
A fender adapter to get the fender closer to the tire, if the mounting bracket is too short.
The adapter has a length of 100mm, the bore pattern is 9.5mm. Internally, Gyroid was used as infill, allowing the adapter to be shortened to the desired length. Recommendation: leave at least 25mm length above the desired thread, so that enough base remains. The threads are printed and can be easily fitted with M6 screws.
Please check beforehand if the fork crown is accessible from below (min. Ø22). On my child's bicycle, I had to file a bit to insert the adapter. Furthermore, a Ø6mm bore is required, for older bicycles, only a bore for M5 might be provided.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)