Fox 36 (2020 - 2023 Model) Front Mudguard - Free 3D Print Model

Search models, users, collections, and posts

Taubert Design

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(2)

All

P2S

P1P

H2D

H2D Pro

P1S

X1 Carbon

H2S

X1E

H2C

X2D

A2L

0.4mm nozzle - 0.24mm layer, 4 walls, 35% infill

Designer

4.1 h

1 plate

4.0(2)

0.6mm nozzle - 0.3mm layer, 4 walls, 35% infill

Designer

3.3 h

1 plate

Open in Bambu Studio

Boost

134

167

Released

Description

Mudguard to suit the Fox 36 2020 - 2023 model.

This was designed for a 27.5" x 2.4 front wheel. It should fit a 29" wheel also, but I'm not sure if it is suitable for a tire larger that 2.4

Requires 2 x M3x10 screws for installation.

Recommended to print in durable UV resistant material such as ABS, ASA, PLA-CF, PETG-CF and PA-CF

Comment & Rating (14)

@Jens_3D

Super design, and also extremely stable, exactly what I was looking for However, there seems to be an error in the file The topmost piece of the mudguard has different shapes on the top and bottom when loaded into Bambu Studio If these are still corrected, it's truly excellent Pictures attached

The designer has replied

Show original

@Atlas_Azul

Thanks for letting me know! I've fixed the issue now, it should print fine. Let me know how it goes :)

@Jens_3D

Replying to @Atlas_Azul :

Worked perfectly, I printed it again, this time it came out perfectly from the printer 👍 I mounted it directly and I think it looks simply awesome Thanks for your work 🙏 I'm excited to see what else you design in the future, you have my follow 💪 I've attached another picture of the old to the new 👍

Show original

@Atlas_Azul

Replying to @Jens_3D :

Nice! I'm glad it worked out this time. If possible, it really helps if you rate the model and leave a boost. I also have a few other MTB related designs :)

@DK_DESIGNZ

Print Profile

0.4mm nozzle - 0.24mm layer, 4 walls, 35% infill

Thanks for this model It fits perfectly and is super easy to print (ABS-GF)

The profile uploader has replied

Show original

@Atlas_Azul

Glad you like it. good to know it still fits on the newer 36's, I hadn't tested it.

@user_1058081167

I printed it in PETG. The screw holes are correctly positioned. It gives a stable impression, doesn't tend to wobble when things get a bit rough, but I still need to test that in use. You write that it should fit a 29" wheel: I mounted a Maxxis Assegai 29 x 2.5": It's very tight, but the wheel still turns. I'll test it off-road this weekend, but I fear there isn't enough space for a tire caked in mud and muck. Is there any chance of getting the Fusion file for the mudguard? Then I could check if I can optimize something

Show original

@Paule1710

all in all quite good, a more precise description of which tires it fits would have been good. Unfortunately, my tires are too thick :( Unfortunately, none have fit here so far, I'll probably have to stick with my soldering iron 😊

The designer has replied

Show original

@Atlas_Azul

Thanks for letting me know. I originally designed it for a 27.5" wheel with 2.4 tires and I've added that to the description. Can I ask what size wheel and tire you were trying it on?

@i.like.cars

what length m2 bolts should I use

The designer has replied

@Atlas_Azul

Sorry, that was a mistake in the listing. You should use 2 x M3x10mm screws. I've just updated the print profiles too to give a tad more clearance for the M3 screws.

@i.like.cars

Replying to @Atlas_Azul :

thank you so much

@Jens_3D

The print profile is no longer public

@Menapace

Print Profile

0.4mm nozzle - 0.24mm layer, 4 walls, 35% infill

Support Issue:Kept tipping over, was kind of heavy. On the plus. side, I got a set of pauldrons out of it.

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.