H2D Vent Caution - No Step Sign

Glad you're here, hope this model works for you!

H2D Vent Caution – No Step

H2C Vent Caution - No Step

I kept putting my flush cutters on the H2D’s automatic front vent, so I needed reminder.  I like the “No Step” ones from aircraft.

It’s applied using double-sided tape.  I would suggest first applying removable painters tape to the machine, and then layering on the double-sided tape.  That way you can easily remove the sign without damage to the H2D if you want to change the sign later.  Any simple double-sided tape should work.

*I used 3M 300LSE applied on top of the painters tape.  DO NOT APPLY 300LSE directly to the H2D, it is a very strong bond and will be extremely hard to remove.

I used PLA+ Black, and Bambu PLA Matte Orange and Red for the colors.  The colors are painted in Bambu Studio, then printed face down.  It's a 50min print using a total of 18g on my H2D.

Please leave a comment, feedback, suggestions, or even a boost if you're feeling generous.  It does help me improve my models and really makes my day.  Be kind, I’m old and still sort of new at this.  Seriously, thank you for printing my models!

Before you go, if you’d take a look at my other models under my profile I’d appreciate it: GrayGav @JGray_3D 

[ https://makerworld.com/en/@JGray_3D/upload ]