3D Printed Roses For All Occasions - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Rick9206

Household>Decor

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 1 walls, 0% infill

Designer

42.7 h

8 plates

4.9(71)

Rose in vase mode, color fix on the stem

3.8 h

3 plates

4.8(65)

Vase Mode - Colour Fix

4.5 h

3 plates

5.0(17)

Open in Bambu Studio

Boost

766

1612

198

101

3.1 k

1.1 k

Released

Description

You asked for the files, here they are! Happy printing guys and gals!

Print time for the rose is about 5 hours and 15 minutes

Print time for the stem is about 5 hours and 5 minutes

Print time for the vase is about 2 hours 30 minutes

I was able to fit up to 18 roses on 1 build plate.

I was able to fit 13 stems on 1 build plate.

DO NOT USE LUDACRIS MODE or SPORT MODE on the roses, and also for the stems start wtih Normal or Silent mode and then after the first 3 to 5 layers move on to sport and gradually increase up to ludacris if you desire speed. Sport mode saves you 24% of time but the time saved on the flower part is not worth the mess if your printer screws up your print. Believe me I have learned after printing about 500 of these things….

I used polymaker filament but you can use any filament you desire.

Good luck to you all!

rose

flower

Comment & Rating (198)

@JWalker76

Beautiful, printed perfectly.

@JWalker76

printed more. great print!

@user_219709099

Boosted

Hello, where did you get the rod please

Show original

@JWalker76

Replying to @user_219709099 :

Its included in the files called "Rose in vase mode, color fix on the stem"

@Ink3D

Print Profile

0.24mm layer, 1 walls, 0% infill

amazing detail easy flawless print no issues

@Iron

hi, could you send me the file please this part is no longer available thank you

(Edited)

@Ink3D

Replying to @Iron :

yes i can send it over

(Edited)

@SuzieQueued

could you send the stem file to me? not available here.

@Louis_C

Really liked print. I used tri-color silk PLA (first time with silk). It came out perfect. Like others, I found that the stem was not included. But found another one and printing that now.

@waleo

hi, can you share the stem STL?

@Bobius

Boosted

Replying to @waleo :

Click the Download and Print button and hit Download STL instead of the 3MF or opening in Bambu Studio. The stem and vase are included in there.

@Wilson551

Print Profile

Rose in vase mode, color fix on the stem

needs supports, moves all over after it gets so tall.

@darocha923

the same thing happened to me and the solution I found was to lower the printing speed

(Edited)

Show original

@Treyu3D

Print Profile

0.24mm layer, 1 walls, 0% infill

fantastico

@EdWithAPrinter

Print Profile

Rose in vase mode, color fix on the stem

Good however with the vase there was a few specs of red. I had a look in the slicer and the part had been made red, but then painted white. So I changed it to have the model just be white, and uploaded it as a print profile. Otherwise, the rose and stem turned out nicely. The stem broke as I took it off the printer (should've let it cool down more 😒), but it was nothing a soldering iron couldn't fix. I printed the entire thing on ludicrous mode, and it turned out fine. No issues from that.