Stable for Lemieux Toy Pony

 I am new to this, and open to constructive criticism.  This was my first attempt trying to modify anything with TinkerCad.  I am totally aware that I could have done certain things better!  Feel free to make suggestions. 

This stable was derived from the following stable designed for Schleich horses by KimaPrint:

https://makerworld.com/en/models/1383264-stable-for-schleich-or-other-horses?from=search#profileId-1489168
 

This is a very large print that utilizes a little over 2kg of filament between all of the plates.  You will need to glue the stall pieces together, and glue the roof onto the stall.  You can interlock these stalls with other stalls like the original, but I have not yet printed a second one to verify fit.

Changes I made to the original:

Scaled larger to fit the Lemieux brand ponies.

Extended the over all length of the door to have better coverage over the stall front.

Added about 10mm to the bottom of the stall windows to make the pieces easier to split without fear of the window frames breaking.

I made the back part of the sides solid in order to split them more easily, though in retrospect, I could have left the windows and learned more about bridging.  I may make another version in the future that has the windows reinserted.

Removed the clip in the front that allows you to add the flooring pieces.  So the flooring pieces will not worth with this model, even if you scale them up.

The example was printed with 0.28mm layer height on a 0.4 nozzle using matte PLA for the body of the stall.  The pink was a high flow PLA from Sunlu.