Flexible Last Stag from Hollow Knight
Print Profile(3)
Description
The Last Stag from Hollow Knight.
You will need to print both 3mfs, i made 2 because they have different layer heights.
The three parts of the body are locked in place during printing by two small pegs inside the model, you will need to snap them after printing.
Printing tips: (if not using 3mf files)
While the body can be printed at the regular layer height (0.2 mm) the beard and seats have too many small details so you will need to lower it. I suggest 0.08 mm.
The body can be printed with no support, but due to possible adhesion issues i suggest adding at least some brim around the back part of the insect, and maybe some support.
Maybe lower the speed to print the seats model, and maybe enable z-hop, those arm rests are delicate.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)