Godzilla's 70th

Godzilla 70th Anniversary – Multi-part 3D Print (My Project on MakerWorld)

This model is my own 3D print of a Godzilla 70th Anniversary diorama. It was printed as a multi-part structure to achieve maximum detail in the surfaces, scales, and lava elements. The project combines several iconic Godzilla designs in a single scene and is fully post-processed, primed, and painted

Technical Details (for MakerWorld):

• Printer: Bambu Lab P1S
• Filament: PLA
• Layer height: 0.12 mm (Detail Mode)
• Multi-part construction for optimal stability and detail accuracy
• Lava effects with translucent filament + dry-brushing
• Overall size: approx 30–35 cm height (depending on STL scaling)

Note:
This is my personal print, not for sale. I am sharing the project on MakerWorld as a showcase and inspiration model

This is an unofficial, fan-made 3D model (fan art). All rights to the character, design, and associated franchise depicted belong solely to the original creators, rights holders, and publishers. This model was created out of pure fan passion and is intended exclusively for private, non-commercial use. Selling these 3D files or the resulting physical models is not permitted.

🧩 Quality & Feedback
• Please post a "Make" with a photo – this helps others and improves visibility.
• Feedback/Issues: Briefly state: Printer, material, layer height, temperature, photo of the problem area.

📄 License / Usage
• Private use according to the model license.
• Commercial use (sales/shop/production) only with an appropriate commercial license membership.

🛠️ Troubleshooting (Briefly)
• Stringing: Lower temperature slightly + check retraction/travel.
• Elephant's foot: Reduce first layer flow/temperature or use Elephant-Foot Compensation.
• Connector too tight: Check calibration/flow, do not scale; if necessary, lightly sand.

My Setup – for a better overview and as a transparent insight into my current equipment. This is how my personal work and technology setup is presented.