Love and Deepspace Qin Che's staff

根据秦彻手杖平面图3D直接生成，精细度有待优化

样品采用PLA SILK+ 红黑和灰色，远观和参考图相似度较高，but手杖头部细节因建模未做细化，故无法达到精致级别

因使用AMS双色切换，耗材冲刷消耗较多，根据数据视个人情况适用

砂纸打磨后上手触感顺滑许多，可以根据个人情况看是否打磨（棱角多，簪头发困难，多磨磨）

源文件放大160%，基本手掌大小，注意放大比例尺寸

欢迎细化更新

Generated directly in 3D based on Qin Che’s cane blueprint; overall refinement still needs improvement.

The sample is printed using PLA Silk+ red/black and gray.

From a distance, the similarity to the reference image is high, but the head of the cane lacks detailed modeling, so it cannot reach a highly polished level.

Because AMS dual-color switching was used, purge waste is relatively high.

Please assess based on your own material cost tolerance.

After sanding, the surface feels much smoother in hand.

You can decide whether to sand or not based on preference

(there are many sharp edges; inserting into a wig/hairpiece is difficult—more sanding helps).

The source file is scaled up 160%, roughly palm-sized.

Please pay attention to size adjustments if you rescale.

Further refinement and updates are welcome.