Ultimate Flip Switch Fidget (Print in Place)

This flip switch fidget was based off of and inspired by a classic rocker light switch. It features an optimized spring and a geometrically strengthened rotating joint. Dozens of prototypes went into this fidget toy to perfect it and make it as satisfying as it is now. The actual switch part was carefully sculpted to be easy to operate, rocking back and forth with a satisfying ‘click’. The more force you use, the louder the click will be. This print was designed to be fully print in place, meaning that it works right off the print bed with no assembly or even supports. It takes only 8.66 grams and less than 30 minutes to print.

You may need to break it in to get it started. Just apply force on the side of the switch that is sticking up.

Printing Instructions:

1. Prepare the Print Bed
   • Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.
   • Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
      
2. Download the Print Profile
   • Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
      
3. Select Your Printing Options
   • Choose your filament type and color.
   • Select your print bed type (e.g., textured or smooth).
   • Confirm your printer settings, ideally for a Bambu Lab printer.
      
4. Start Printing
   • Begin the print job. No supports are necessary.