CGX Visuals

cover

IMG_0546.JPG

Iphone 17pro Einzelteile.png

IMG_0545.JPG

IMG_0544.JPG

IMG_0543.JPG

Iphone 17pro back.png

Iphone 17pro front.png

Backcover

plate_1.png

Front

plate_2.png

Flash

plate_3.png

2025-12-06_8d2b5c23efae7.jpg

Bildschirmfoto 2025-12-06 um 11.24.00.png

&nbsp;<h2>Backcover (hochkant drucken – beste Ergebnisse)</h2>Das Backcover bekommst du am saubersten hin, wenn du es hochkant druckst.In dieser Position wirken die Layer sauber durch und du bekommst schöne, glatte Seitenflächen.&nbsp;Empfohlen:<ul><li>Ausrichtung: Hochkant</li><li>Supports: Ja, am besten Baumstützen (Tree Supports)</li><li>Support Density: 10–15 %</li><li>Support-Kontakt: ca. 0,2–0,25 mm</li><li>Schichthöhe: 0,16–0,20 mm</li></ul>&nbsp;Die Baumstützen umarmen das Modell schön und lassen sich danach leicht ablösen → weniger Nacharbeit, sauberere Kanten.&nbsp;<h2>Display </h2>Das Display ist super unkompliziert:<ul><li>Supports: Keine nötig</li><li>Layer Height: 0,16–0,20 mm</li><li>Infill: 10–20 %</li><li>Druckrichtung: Flach auf der Rückseite für eine saubere Frontfläche</li></ul>&nbsp;<h2>Blitz-Element (separat für Farbakzente)</h2>Das kleine Blitz- bzw. Kameraelement ist so gestaltet, dass du es:<ul><li>komplett stützenfrei drucken kannst</li><li>farblich variieren kannst (z. B. weiß, silber, gelb)</li></ul>&nbsp;Einstellungen:<ul><li>Supports: Aus</li><li>Infill: 10–15 %</li></ul>&nbsp;<h2>Material &amp; Allgemeine Empfehlungen</h2><ul><li>Material: PLA empfohlen (leichter, sauberer Druck)</li><li>Nozzle: 0,4 mm</li><li>Perimeter: 2–3</li><li>Infill insgesamt: 15–25 %</li><li>Skalierbarkeit: Modell kann ohne Probleme verkleinert oder vergrößert werden</li></ul><h2>Zusammenbau</h2><ul><li>Teile nach dem Druck leicht entgraten</li><li>Zusammenstecken oder mit einem Tropfen Sekundenkleber fixieren</li><li>Fertig – je nach Skalierung als Spielobjekt, Deko oder Miniatur nutzbar</li></ul>&nbsp;

&nbsp;<h2>Back Cover (print vertically – best results)</h2>You'll get the cleanest back cover if you print it vertically.In this position, the layers show cleanly, and you get nice, smooth side surfaces.&nbsp;Recommended:<ul><li>Orientation: Vertical</li><li>Supports: Yes, preferably Tree Supports</li><li>Support Density: 10–15 %</li><li>Support Contact: approx. 0.2–0.25 mm</li><li>Layer Height: 0.16–0.20 mm</li></ul>&nbsp;Tree supports hug the model nicely and are easy to remove afterwards → less post-processing, cleaner edges.&nbsp;<h2>Display </h2>The display is super straightforward:<ul><li>Supports: None needed</li><li>Layer Height: 0.16–0.20 mm</li><li>Infill: 10–20 %</li><li>Print Direction: Flat on the back for a clean front surface</li></ul>&nbsp;<h2>Flash Element (separate for color accents)</h2>The small flash or camera element is designed so that you can:<ul><li>print it completely support-free</li><li>vary its color (e.g., white, silver, yellow)</li></ul>&nbsp;Settings:<ul><li>Supports: Off</li><li>Infill: 10–15 %</li></ul>&nbsp;<h2>Material &amp; General Recommendations</h2><ul><li>Material: PLA recommended (easier, cleaner print)</li><li>Nozzle: 0.4 mm</li><li>Perimeters: 2–3</li><li>Total Infill: 15–25 %</li><li>Scalability: Model can be scaled down or up without problems</li></ul><h2>Assembly</h2><ul><li>Lightly deburr parts after printing</li><li>Push together or fix with a drop of superglue</li><li>Done – usable as a play object, decoration, or miniature, depending on scaling</li></ul>&nbsp;

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This 3D model is a Fake Phone 17 Pro that I designed entirely from scratch in Fusion. The concept is a simple, modern smartphone model that works great for play, decoration, as a dummy/prop, or even as a miniature.Design Features: The model consists of three separate parts: the Back Cover, the Display, and a separate Flash Element.<ul><li>NO AMS Required: Since the parts are printed separately, you can combine different colors to get a premium look without needing a multi-material system.</li><li>Clean Aesthetic: The multi-part assembly ensures a sharp and clean design while remaining functional and flexible.</li></ul>Scaling Options: You can scale the model freely to fit your needs:<ul><li>1:1: If you want a realistic prop or dummy.</li><li>Smaller: Great as a miniature or decorative object.</li><li>Larger: If you want to experiment or build something unique.</li></ul>Note: This design is intentionally brand-neutral and serves only as a fan interpretation of the iPhone 17 Pro. It is not an official product or an exact replica.Have fun printing, customizing, and playing!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Über einen Boost würde ich mich riesig freuen :)</boostcontent></boostme>

Fake Phone 17 Pro (3-Piece) – NO AMS

ASIA

Print Profile(1)

Description

Comment & Rating (50)

License

Related Models