Caliper / Caliper EU-Pegboard / Pegboard

Summary

I have designed several different holders for EU standard pegboards. For standardized pegboards with Euro-perforation, the lateral hole spacing of the round holes is 15/30 mm and the keyhole spacing is 45 mm.

This is a holder for a caliper / sliding gauge.
Depending on the thickness of the pegboard sheet, I would recommend sticking a piece of duct tape between the two holders to achieve better slip resistance.

The infill extends into the holders, so they are not simply attached and tear off, but offer good stability for everyday use in the workshop.

Print Settings      

Printer:                              

CR-10

Supports:                              

Yes

Infill:                              

40

Filament: DAS FILAMENT PLA