Mudguard, mudguard for Fox 34 suspension forks
Print Profile(1)
Description
3D Model Description
Fender, mudguard for Fox 34 suspension forks. Tested with a 2016 Fox 34
Keeps most of the mud away on wet days
It easily screws to the back of the fork brace
The two holes are present in the fork, however, two M3 threads must be cut into these holes
Then screw it on with two M3 x 10mm screws plus washers. It is best to use threadlocker
3D Print Settings
PETG, PLA, ABS...
Use materials with good layer adhesion
Printable standing without supports
0.24mm layer, 15% infill
Boost Me (for free)
If you like the design Then please give me a Boost + Like – that helps immensely
Thank you very much
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)