Yas Marina Circuit

Please share a picture in a comment if you print it! I would love to see how it turns out! Also, please consider boosting the design, it helps me continue to share designs for free :)

Bring the legendary Yas Marina Circuit to life with this detailed 3D wall display. The model includes clearly marked sector divisions in different colors, along with the two DRS detection zones, DRS zones, and the speed trap. Perfect for motorsport fans and hobbyists looking to expand their F1-themed decor.

The main track print uses 6 colors and includes a single programmed pause (already set in the 3MF file at layer 31) to perform the manual filament change: (For users that don't use the A1 I uploaded another print profile)

🔄 Color Change Instructions (during the pause):

1. Swap Black (Track) → Red (Sector 1):
    - Manually cut the filament in the extruder (Black).
    - Press the release handle of the extruder in the A1 Combo. (I'm not sure how to do it in the P/X Series)
    - Gently pull out the black filament.
    - Insert the Red filament in it's place and continue the print.

    

2. Swap Green (DRS zones) → White (Numbers & Start flag):

   - Take out the green filament out of the AMS and load White in its place

Then just press play and the print will finish by itself :)