Domino stairs with anchor

Sometimes it can be difficult to align the stairs. For this reason, I came up with an anchor that is simple but helpful for alignment. This way it can be easily adjusted and the top plate is firm despite its lightness and cannot slip

FURTHER MODELS

I have created more models for domino fun. Feel free to check them out, maybe there is something else you could use

DOMINO LINE SAFETY BARRIER

Domino Line Safety Barrier – Free 3D Print Model – MakerWorld

With this, you can build in individual safety features in between if you are building larger and longer projects and want to minimize the risk

DOMINO STAIRS

Domino Stairs – Free 3D Print Model – MakerWorld
With these stairs, you can bridge other lines and build cool intricate layouts. It also helps to utilize the space in your home. The domino stairs have different width plates that can be placed on top, so that one or two lines can be bridged

DOMINO STAIRS WITH ANCHOR

Domino Stairs with Anchor – Free 3D Print Model – MakerWorld

If the regular stairs are unwieldy for you because the top plates are loose, I have designed stairs with an anchor. The top plate is hooked onto the stair treads and sits firmly. Nothing can slip and you can even align the stairs more easily for building. Here too there are top plates of different lengths

DOMINO CROSSING

Domino Crossing – Free 3D Print Model – MakerWorld

If you find the bridges too large, for example, because you want to cross lines in a very small space, there is another option, namely the crossing. The part is placed exactly in the middle of both lines and the pins trigger the line on the other side, without using a bridge or accidentally triggering the other line

DOMINO “DC” DIRECTION CHANGER

Domino "DC" Direction Changer – Free 3D Print Model – MakerWorld

This direction changer makes it possible to change the direction of the line in a small space. You don't need to build curves, which consume dominoes and are also a source of error, because if the curve is not built correctly, the line can stop. This DC is an ideal replacement

MINI-DOMINO CROSSING

Mini-Domino Crossing with integrated pins – Free 3D Print Model – MakerWorld

This Mini-Domino Crossing is much smaller, so it disappears better between the lines

The pins are also directly integrated so they cannot fall out. This way you can cross two lines in an even smaller space without bridges

DOMINO SLIDE

Domino Slide – Free 3D Print Model – MakerWorld

Why always stairs, I asked myself the same question and designed the Domino Slide instead. It is compatible with the Domino Stairs I designed, so it can replace a stair or even be used as the start of a line. This way you can use it in many ways

MINI-DOMINO “DC” DIRECTION CHANGER

Mini-Domino "DC" Direction Changer – Free 3D Print Model – MakerWorld

This DC is even smaller, so the lines can stand closer together. This way, tight curves that are very unlikely to fall can be replaced

I would be very happy if you look at the other parts and possibly print some and give me feedback so I can improve them

More new parts or improvements will follow from time to time, so feel free to follow me so you don't miss anything