Filament Tube T-connector - only one screw needed
Print Profile(1)
Description
Boost Me (for free)
If it's useful, remember to come back and support me!
If it's useful, remember to come back and support me!
Optimized volume, optimized hardware, only one screw needed, everything else is printed
Designed for TOP AMS, also compatible with other 8-color and 16-color AMS units
Use the lowest layer height you can print well (I used 0.08), A wall, 999 perimeters (i.e., solid print), inner walls first then outer walls.
Use M3*8 screws, and the PTFE tube must be 3mm inner diameter and 4mm outer diameter.
Tested to be smooth and without resistance
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)