Grinch - Ew People - hueforge 2 colours

Ewww people! - the grinch 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 1.76mm

Filaments Used:
    #000000 PLA Sun lu Black  Transmission Distance: 0.1
    #ffffff PLA Sunl u White  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to White for the rest.