Krefeld Pinguine KEV Hueforge
Print Profile(3)
Description
Krefeld Pinguine Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Sunflower Yellow
At layer #22 (1.84mm) swap to Ivory White for the rest.
Boost Me (for free)
Wenn Ihnen meine Kreation gefällt, unterstützen Sie mich bitte mit einem kleinen Boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)