Flight Fins for Onewheel PINT/XR/GT/ADV
Print Profile(1)
Description
If you need compatible FF fenders, purchase directly from flight fins, or browse my designs. I have models for the Pint, XR, GT and ADV.
Print in TPU only…the softer, the better. Use 15-20% infill. No supports required.
Two mounted fins require the following screws/nuts:
- 4x - #12 5/8" Screw
- 4x - #12 1" Screw
- 8x - #12 KEPS Lock Nuts
Included in the project file are optional extenders:
- You will need to MIRROR one of the extenders in bambu slicer if printing both.
- You will need longer screws for these to work.
Boost Me (for free)
If possible, please boost, like and rate this model to show your appreciation and support.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (91)